Flip Fold Card using Stampin' Up's Forever Fern

 

The Forever Fern stamp set is a beautiful set of images. It's a 'Distinktive' set which means that the stamped images contain all the shading you need, so that you get a beautiful realistic image every time, without the need to be an expert at colouring! What's not to love about that?! 

So I thought it would be perfect for this card, which I taught in my zoom class this week. It's a flip fold card, which flips over the centre panel as you open the card.

I also made another of this style of card recently for a friend who recently had twins! I hadn't got any twin baby greetings, so I decided to make a card that said 'Welcome Baby' on the front, and then '& Baby' on the flip side!!

This time, though, I added an extra panel for signing the card, I'll give you instructions for both styles below.

Hope you like it!

Thanks for stopping by

Jane x

Instructions

Cardstock 5 3/4” x 6 3/4” (14.5 x 17 cm)

On the Long side, 

  

cut @ 1 1/4” & at 5 1/2” from 1 1/4” to 4 1/2” ONLY.     (@ 3cm & 14 cm from 3cm to 11.5cm)

score @ 2 3/4” from 0 to 1 1/4”  & from 4 1/2” to 5 3/4” (@ 7cm from 0 to 3cm & 11.5 to 14.5cm)

Flip from top to bottom, 

score @ 4” from 0 to 1 1/4”  & from 4 1/2” to 5 3/4” (@ 10cm from 0 to 3cm & 11.5 to 14.5cm)

Turn to the short side

Cut @ 1 1/4” & 4 1/2” from 1 1/4” to 2 3/4” & 4” to 5 1/2” 

                                                                                (@ 3 & 11.5cm from 3 to 7cm & 10 to 14cm)

NB these cuts connect the previous cut lines to the adjacent score line

Your card should now look like this

Fold & burnish the score lines, to form a zig zag from the outer part of the card. The centre panel will flip over when the card is opened & closed.

If you prefer to have an extra panel for signing, then start with a piece of cardstock 5 3/4” x 11 1/16” (14.5 x 28.1cm)

Follow all the instructions above, then score on the long side, with the above cuts/scoring towards the right. Score @ 4 1/4” (11cm). 

Your card will look like this

Decorate this panel with a piece of contrast card 4 1/8” x 5 5/8” (10.7 x 14.2 cm) & a stamped panel of Whisper White 4” X 5 1/2” (10.4 X 13.9cm)

To decorate the flip card:

Contrast Card Layer (if you don’t want to use a contrast card layer, then use these cutting instructions for your DSP)

Cardstock (or DSP) 6 3/8” x 5 5/8” (16.1 x 14.2cm)

On the long side 

Cut @ 1 1/8” & 5 1/4” from 1 1/8” to 4 1/2” (@ 2.7 & 13.4cm cut from 2.7 to 11.5cm)

On the short side

Cut @ 1 1/8” & 4 1/2” from 1 1/8” to 5 1/4” (@ 2.7 & 11.5cm cut from 2.7 to 13.4cm)

This should remove the centre section.

Now cut on the long side @ 2 5/8” (6.7cm)

Turn through 180º and repeat.

It should look something like this

Now cut the centre panel to measure 4 1/8” x 3 1/8” (10.7 x 8.2cm)

Cut another piece of cardstock to the same measurements.

DSP layer

Start with a piece measuring 6” x 5 1/4” (15.2 x 13.9cm)

On the long side 

Cut @ 1” & 5” from 1” to 4 1/4” (@ 2.4 & 12.8cm cut from 2.4 to 11.5cm)

On the short side

Cut @ 1” & 4 1/4” from 1” to 5” (@ 2.4 & 11.5cm cut from 2.4 to 12.8cm)

This should remove the centre section.

Now cut on the long side @ 2 1/2”(6.4cm)

Turn through 180º and repeat.

Your DSP should look like the template above.

Now adhere the DSP panels to the corresponding Contrast Card panels, and adhere the resultant panels to the base card in the corresponding sections. 

Panels for the flip section

2 Whisper White (or DSP) 4” x 3” (10.4 x 7.9cm)

NB Be careful how you stamp/decorate the front panel, as the left hand edge of this one will be obscured by the surround. 

Adhere these panels to the contrast card panels, then adhere to your card. NB if you lay the card out flat to do this, then the reverse panel (flip side) needs to go on the same side as your DSP. The panel you will see from the front goes on the undecorated side. 

Theatre Card Using Pampered Pets

Aren’t these dogs so cute? When I saw the Pampered Pets Suite in the Annual Catalogue, I knew I wanted to try a Theatre Card, and the dogs are just so cute!

The card folds flat for posting, and when you pull from the thumb notches, the ‘curtains’ open to reveal your greeting! 

I love it!

Hope you like it!

Thanks for stopping by

Jane x

Instructions: 

Using an A4 piece of cardstock, cut 2 Pieces at 5 3/4” x 8 1/4” (14 x 21cm)

NB Keep the offcut, we’ll use it later!

Cut each of the 2 pieces at 4 1/8” (10.5cm) giving you 4 pieces of 5 3/4” x 4 1/8” (14 x 10.5 cm)

Now cut 2 of those pieces at 3 3/4” (9.5cm) giving you 2 pieces of 5 3/4” x 3 3/4” (14 x 9.5 cm)

                                                                                                & 2 of 5 3/4” x  3/8”   (14 x 1cm)

Attach DSP 5 5/8” x 4” (13.5 x 10cm) to one of the 4 1/8” (10.5cm) pieces making sure you glue the whole piece.

Using the 4th largest Stitched Rectangle, cut an aperture in the centre of this piece. 

Now line up the frame piece with the other 4 1/8” (10.5cm) piece (the back section) so that all the outer edges match. Apply glue to the back of the centre piece and reinsert it into the centre of the frame so that it adheres to the back in line with the frame aperture. 

Cut thumb notches, using a small circle punch (1”) either side of the aperture.

Score each of the 3 3/4” (9.5cm) pieces at 7/8”, 2 7/8” (2cm, 7cm) Fold & burnish the score lines.

Attach DSP 5 5/8” x 1 7/8” (13.5 x 4.5cm) & 5 5/8” x 2 3/4” (13.5 x 6.5cm) to the 2 larger sections.

NB If your DSP is directional these need to be opposite ways up on the 2 pieces of cardstock - for a fuller  explanation please see the video!

Using the 3/8” (1cm) pieces, wrap around the scored pieces to form tabs on each end of the narrow pieces. They should be fairly tight but not so tight that the card can’t move through these bands. Attach the bands to the back of the frame piece close to the side of the aperture and central between the top & bottom.

Attach the scored pieces to the sides of the back, by applying glue to the section without DSP, ensuring that it is central between top & bottom of the back. When you attach these, the DSP side will be facing the back, So fold them on the centre score line, so that the larger piece of DSP now faces the top.

Thread these through the bands.

To stop these unthreading, use the offcut from the A4 piece. Fold it in half & glue together, then repeat, so that you get a piece that is 4 layers thick. Cut that into 4 pieces. Glue each of these close to the corners on the back of the ‘curtains’

Pop Up Vase Card Using Magnolia Memory Dies

Today, I have an updated version of an old card to show you. I made the original in a class I attended, run by my friend and mentor Tracey Allen of Stamp & Scrap UK. It was one of the first Stampin' Up! cards I ever made!

This time I've used the Magnolia Lane suite. I love the colour combination of Mossy Meadow & Petal Pink! Unfortunately the papers are now retired, but I think it would look lovely in the Peony Garden DSP which is in the new Annual catalogue.

My flowers were cut using the Magnolia memory dies, and I also used a die cut from the Forever Flourishing dies to add some greenery. 

The greetings were from the Peaceful Moments stamp set, and mounted onto a die cut from the Painted Labels dies.

Hope You Like it

Thanks for stopping by

Jane x

Measurements:

Card Base is 1/2 a sheet of Petal Pink A4 folded in half.

Card front:                 DSP: 3 of 3 3/4" x 1 11/16" (9.5cm x 4cm)

Mossy Meadow cardstock: 3 of 3 7/8" x 1 13/16" (10cm x 4.5cm)

Inside: Mossy Meadow Cardstock: 3 5/8" x 5 3/8" (9.5cm x 14cm)

             Whisper White Cardstock: 3 3/8" x 5 1/8" (8.5cm x 13cm)

You will also need 

DSP 2 1/4" x 5" (6cm x 12.5cm) Score on short side @ 3/4", 1 1/2" (2cm,4cm)

                                                         and on long side @ 1" (2.5cm) from each end

1 piece Petal Pink Cardstock 2" x 1/2" (5cm x 1.5cm)

1 piece Petal Pink Cardstock 3 7/8" x 3/4" (10cm x 2cm) scored @ 3/8" (1cm)

Several strips of Mossy Meadow Cardstock 1/2" (1cm) wide and at least 4" (10cm) long

Ribbon Reel Box

I love Stampin’ Up! Ribbons, but mine usually end up slowly unravelling in a box & getting all tangled up! So when I saw fellow demonstrator, Esther Howard (Stampin’ Star Creations) making boxes to store them in, I thought what a good idea! So, I’ve now got all my ribbons organised & can see what I have when I open the box! Much better! 

I’ve redesigned the box, to make it a little easier for me, and been brave enough to even make my first video! My video technique, particularly staying in shot, needs to improve, but it’s a start! 

Hope you like it!

Thanks for stopping by

Jane x

Sunset Card using Sailing Home Stamp set

Where do you get your inspiration from? For this card, I took inspiration from.a photo of a sunset at  Point of Ayr lighthouse on the North Coast of Wales, which I saw in a Facebook group! I could see straight away it would be easy to make a lovely card!

I masked off the top of the card using a post it note & worked on the bottom part first, using Crushed Curry, Terracotta Tile & Night of Navy to sponge the sea.

I then positioned a circle cut from another post it note, so that it was in the correct position for the light reflection that I'd already created & then repositioned my larger post it note to mask off the bottom half.

I then sponged the top half, finally removing the circle & sponged again with Crushed Curry, to give the Sun some colour.

I stamped the lighthouse from Sailing Home, and the strip of land from Waterfront in Memento Tuxedo Black. then coloured both in using a dark Stampin' Blends pen, to get the full silhouette effect.

I mounted the image on a piece of Night of Navy Cardstock to help frame it, and attached that to a card base made from Bumble Bee Cardstock.

Hope you like it!

Thanks for stopping by

Jane x

New Annual Catalogue Week - Project No 5

To celebrate our new Annual Catalogue, & our lovely new In-Colours, I'm bringing you 5 projects, which are all variations on a theme, of fold flat boxes & bags.

Todays box, using the new in colour Magenta Madness, was inspired by a very similar box made by fellow demonstrator Jay Soriano of Mitosu Crafts (check out their blog here). When I saw Jay making this one, I thought it would fit perfectly with my theme for this week. I've made some very minor changes to Jay's box, but it is his design. Fabulous isn't it!

Hope you like it!

Thanks for stopping by

Jane x

Instructions:

You will need 1 piece of 6" x 6" in-colour DSP in Magenta Madness

Trim your DSP down to 6" x 5 1/4" (15cm x 14cm)

Score on the long side at 1 1/4", 4 3/4" (3cm, 12cm)

and on the short side at 3/4", 1 1/2", 2 1/4", 3 3/4", 4 1/2" (2cm, 4cm, 6cm, 10cm, 12cm)

Remove the sections marked on the template below, and round the corners on the resultant flap.

Using a ruler & your scoring tool score diagonal lines as shown in the template. 

Fold & burnish all your score lines, Noting that both vertical score lines should be Mountain folds. The Horizontal & diagonal score lines marked with an M should be Mountain folds, and those marked with a V should be Valley folds. 

Fold in the side sections (fold on the vertical folds) & You should now be able to form your box, ensuring that all folds remain as mountain or valley according to how they were marked on the template.

Tuck the flap into the pocket formed between the end panel and the folded in corners. 

New Annual Catalogue Week - Project No 4

To celebrate our new Annual Catalogue, & our lovely new In-Colours, I'm bringing you 5 projects, which are all variations on a theme, of fold flat boxes & bags.

Todays box, using the new in colour Just Jade, was inspired by a very similar box made by fellow demonstrator Sally Stampers (check out her blog here) To fit in with my theme for this week I've changed her design a little, making it into a fold flat box.

Hope you like it!

Thanks for stopping by

Jane x

Instructions:

You will need a piece of Cardstock 8 1/4" x 9" (21cm x 22.5cm)

4 panels of DSP 4" x 1 3/4" (10cm x 4cm) layered on Whisper White 4 1/8" x 1 7/8" (10.5cm x 4.5cm)

Score on the short side at 2", 6 1/4"     (5cm, 16cm)

   and on the long side at 2", 4", 6", 8" (5cm, 10cm, 15cm, 20cm)

Remove the sections marked on the template below, and round the corners on the resultant flap.

Using a ruler & your scoring tool score diagonal lines as shown in the template. 

Fold & burnish all your score lines, Noting that both vertical score lines should be Mountain folds. The Horizontal & diagonal score lines marked with an M should be Mountain folds, and those marked with a V should be Valley folds. 

Decorate by adhering the DSP panels on to the centre panels of your project.

Fold in the side sections (fold on the vertical folds) & You should now be able to form your box, ensuring that all folds remain as mountain or valley according to how they were marked on the template.

Tuck the flap into the pocket formed between the end panel and the folded in corners.